Screw Clamp PTC Lug Sensor 80C 2.2K Ohm Murata PTFM04BF222Q2N34BS Cross

Murata Code PTFM04BF222Q2N34BS POSISTOR Cross, Screw Clamp PTC Overheating Sensing Protection Lug Terminal Type 80C 2200 Ohm. More detail can be founded in  https://amwei.com/murata-ptfm04bf222q2n34bs-ptc-lug-sensor-80c-2200-ohm/

PTC Metal Lug Tag Terminal Probe Features

Screw clamp type temperature sensor, for sensing the temperature of transistors, thyristors, stereo main amplifiers, and other devices having risk of overheat.

Limit temperature sensor with epoxy resin coating.

Tinned pin leads wire.

Metal lug tag screw clamp type easy mounting.

Metal tag lug permits good thermal coupling and

thus short response time.

Electrical Specifications

•Max. operating voltage (TA = 0-40 C) Vmax: 30 V DC

•Measuring voltage (TA = 25 C  Tsense) Vmeas ≤ 2.5 V DC

•Rated resistance R25 ≤ 330 ohm

•Sensing temperature Tsense: 80C centigrade.

•Resistance at 65℃ (Tsense-15C): ≤1500 ohm

•Resistance at Sensing temperature 80C (Tsense): ≥2200 ohm .

•Maximum permissible current: 100mA

•Operating temperature range (V ≤ Vmeas,max) Top -25–+130 C

•Operating temperature range (V = Vmax) Top 0–+40 C

Packaging Information

Loose bulk in plastic bag.

Making use of the characteristics that the resistance of ceramic PTC thermistors increases sharply above curie temperature, when ambient temperature increases abnormally, protective circuit installed PTC thermistor will turn on or cut off loop through resistance changing, achieving thermal protection purpose.

PTC thermistors protect such equipment and components as motors, transformers, power transistors and thyristors against over-temperature.

A PTC thermistor is less expensive than a thermostat, and its switch temperature can be more accurately specified. It is also smaller and easier to design-in to electronic circuitry. Therefore PTC thermistors can be ideal devices for temperature detection, monitoring, indicating, limiting and over (excessive) temperature protection.